ICF-1150I-S-SC-T Industrial RS-232/422/485 to single mode fiber converter

ICF-1150I-S-SC-T Industrial RS-232/422/485 to single mode fiber converter, SC connector, 2 KV isolation, -40 to 85°C operating temperature

Highlights

  • RS-232, fiber, and RS-422/485 3-way communication
  • Rotary switch to change the pull high/low resistor value
  • Extend RS-232/422/485 transmission up to:
  • 40 km with single-mode
  • 5 km with multi-mode
  • 3-way Galvanic Isolation (for”I”model only)
  • -40 to 85°C wide temperature models available
  • Class I, Div. II certification (Pending)

Description

Includes

  • 1 x ICF-1150 Series unit
  • 1 x installation guide
  • 1 x warranty statement

Specs:

Fiber Connector
SC or ST

Wavelength
ICF-1150-S (single-mode) 1310 nm
ICF-1150-M (multi-mode) 850 nm

Tx Output
ICF-1150-S (single-mode) > -5 dBm
ICF-1150-M (multi-mode) > -5 dBm

Rx Sensitivity
ICF-1150-S (single-mode) -25 dBm
ICF-1150-M (multi-mode) -20 dBm

RS-232 Signals
TxD, RxD, SGND

RS-422 Signals
TxD+, TxD-, RxD+, RxD-, SGND

RS-485-4w Signals
TxD+, TxD-, RxD+, RxD-, SGND

RS-485-2w Signals
Data+, Data-, SGND

Baudrate
50 bps to 921.6 Kbps

ESD Protection
15 KV for all signals

Isolation
2 KV RMS isolation per I/O port for 1 minute

Operating Temperature
Standard Models 0 to 60°C (32 to 140°F)
Wide Temp. Models -40 to 85°C (-40 to 185°F)

Input Voltage
12 to 48 VDC

Power Consumption
ICF-1150 127 mA @ 12 V
ICF-1150I 163 mA @ 12 V

Overview:

The ICF-1150 series support 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent.

When an ICF-1150 converter receives data from any one port, it will send the data out through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.

Reviews

There are no reviews yet.

Leave Comment
Be the first to review “ICF-1150I-S-SC-T Industrial RS-232/422/485 to single mode fiber converter”