ioLogik E2212 Active Ethernet I/O with 8 digital inputs, 8 digit

ioLogik E2212 Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIOs

Highlights

Selectable digital I/O combination ( by software)
Accepts PNP or NPN sensors
DI counter saved automatically when power shuts off
Instant event messaging by TCP/UDP/email/SNMP trap
Easy-to-use Click&Go Logic for local output control
PC-based configuration utility and web console
I/O control over Modbus/TCP and SNMP protocol
Windows/WinCE VB/VC.NET and Linux C APIs
Peer-to-Peer I/O without controller

Description

Includes

1 x ioLogik E2200 Series unit
1 x support CD/DVD

Specs:

Ethernet
1 x 10/100 Mbps, RJ45

Protection
1.5 KV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP

Interface
RS-485-2w Data+, Data-, GND

Serial Line Protection
15 KV ESD for all signals

Channels
8, source/sink selectable

Sensor Type
2 6-point groups for NPN/PNP type

Dry Contact
Logic 0 short to GND
Logic 1 open

Wet Contact
(For Source Type)
Logic 0 0 to 3 VDC
Logic 1 10 to 30 VDC (DI COM to DI)

Channels
8, sink type, 36 VDC, 200 mA

I/O Mode
DO or Pulse Output (up to 100 Hz)

Isolation
2K Vrms or 3K VDC (Magnetic)

Channels
4

I/O Mode
DI or Event Counter (up to 900 Hz)
DO or Pulse Output (up to 100 Hz)

Overview:

Flexible Digital Input/Output Configuration

The ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12-inputs/8-outputs, 8-inputs/12-outputs, or 10-inputs/10-outputs.

Single Ethernet DIO that Accepts 3 Sensor Types

Unlike traditional Ethernet I/O products, the ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You can choose the sensor type based on your wiring approach.