KCM-5611

Main Features

• 1/2.8″ Progressive Scan CMOS
• Day and night function with mechanical IR cut filter
• Superior low light sensitivity
• Minimum illumination 0 lux with IR LED on
• 18x optical Zoom
• Built-in f4.7- 84.6 mm / F1.6-2.8 Megapixel DC Iris zoom lens
• 15 fps at 1920 x 1080 resolution
• Selectable H.264, MPEG-4 SP, MJPEG compressions with dual streaming
• Serial port for external pan & tilt scanner
• Two-way audio
• Weatherproof IP66 rated casing
• Advanced WDR
• 2D+3D Digital Noise Reduction
• Video Motion Detection
• Powered by PoE Class 3 / DC 12V
Categories: ,

Description

•Device
Device Type Box Camera
Image Sensor Progressive Scan CMOS
Sensor Size 1/2.8″ (5.42 x 3.41 mm)
Horizontal Resolution 974 TVL
Day / Night Yes
Minimum Illumination
Color: 0.1 lux at F1.6 (30 IRE, 2400 °K)
B/W: 0 lux (IR LED on)
Color to B/W switch ISP based switch, configurable
Mechanical IR Cut Filter Yes
IR Sensitivity Range 700 – 1100 mm
IR LED IR LED x 24 (850 nm)
IR Working Distance 20m (0 lux, 30 IRE, Max Exposure Gain)
Electronic Shutter 1/5 ~ 1/2,000 sec (manual mode); 1/5 ~ 1/10,000 sec (auto mode)
• Lens
Focal Length Zoom, f4.7 – 84.6 mm / F1.6 – 2.8
Zoom Ratio 18x optical
Iris DC Iris
Focus Auto Focus
Horizontal Viewing Angle 48.9°- 3.6°
• Video
Compression H.264, MPEG-4 SP, MJPEG
Maximum Frame Rate
vs. Resolution (H.264, MJPEG) 15 fps at 1920 x 1080, 30 fps at 1280 x 720, 30 fps at 640 x 480
Maximum Frame Rate
vs. Resolution (MPEG-4 SP) 11 fps at 1920 x 1080, 25 fps at 1280 x 720, 30 fps at 640 x 480
Multi-Streaming Simultaneous dual steams based on two configurations
Bit Rate 28 Kbps – 6 Mbps (per stream)
Bit Rate Mode Constant, Variable
Image Enhancement
Advanced WDR; White balance: automatic, hold and manual; Brightness; Saturation; Contrast;
Sharpness; Automatic gain control; 2D+3D Digital Noise Reduction; Flickerless; Defogging
Privacy Mask 4 configurable regions
Text Overlay User defined text on video
Image Orientation Image flip and mirror
• Audio
Compression 8 kHz, Mono, PCM, 16 bit encoding; G.711
Audio-In 3.5mm Phone Jack
Audio-Out 3.5mm Phone Jack
• Network
Protocol & Service TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Pelco-D, Pelco P
Ethernet Port 1, Ethernet (10/100Base-T), RJ-45 connector
Security IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1X network access control
• Alarm
Alarm Trigger Video motion detection (3 regions); External device through digital input
Alarm Response
Notify control center; Go to Zoom preset point or preset tour; Change camera settings; Command other devices; E-mail notification with snapshots;
Save video or snapshot to local storage; Upload video, snapshot to FTP server; Activate external device through digital output
• Interface
Digital Input 2, terminal block
Digital Output 2, terminal block
Serial Port RS-485, RS-422, terminal block
Local Storage MicroSDHC memory card slot (card not included)
• General
Power Source / Consumption
PoE Class 3 (IEEE802.3af) / 10.7 W (IR on)
DC 12V / 8.5W (adapter not included)
Weight 1324g ( 2.92 lb)
Dimensions (W x H x D) 115.20 mm x 130.59 mm x 195.00 mm (4.50″ x 5.10″x 7.70″)
Environmental Casing Weatherproof (IP66 rated)
Starting Temperature -20°C ~ 50°C (-4°F ~ 122°F) within 30 minutes
Operating Temperature -40°C ~ 50°C (-40°F ~ 122°F)
Operating Humidity 10%~ 85% RH
Approvals CE (EN 55022 Class A, EN 55024), FCC (Part15 Subpart B Class A), IP66
• Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
Firmware Access Browser Microsoft Internet Explorer 8.0 or newer (full functionality); Other browsers with VLC installed (partial functionality)

Reviews

There are no reviews yet.

Leave Comment
Be the first to review “KCM-5611”