NPort 5650I-8-DT 8-port RS-232/422/485 device server with 2 KV optical isolation

Description

Includes

• 1 x NPort 5600 Desktop Series unit
• 1 x support CD/DVD
• 1 x installation guide
• 1 x warranty statement
• 1 x power adaptor

Number of Ports
2

Speed
10/100 Mbps, auto MDI/MDIX

Connector
8-pin RJ45

Number of Ports
8

Serial Standards
NPort 5610-8-DT RS-232
NPort 5650-8-DT RS-232/422/485

Connector
NPort 5610-8-DT/5650-8-DT/5650I-8-DT DB9 male
NPort 5610-8-DT-J/5650-8-DT-J RJ45 (8 pins)

Operating Temparture
0 to 55°C (32 to 131°F)

Input Voltage
12 to 48 VDC

Overview

NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.

Convenient Design for RS-485 Applications
The NPort 5650-8-DT device servers support selectable 1 KΩ and 150 KΩ pull high/low resistors and a 120 Ω terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs
The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adaptor.

LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Two Ethernet Ports for Convenient Cascade Wiring
The NPort 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.

Automatic Warning Function by Speaker and/or E-mail
The built-in speakers can be used to alert administrators of problems with the Ethernet links or power input. The web console indicates which Ethernet link or power input has failed. An e-mail warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.