ioLogik R2110 RS-485 remote I/O with 12 digital inputs and 8 dig

ioLogik R2110 RS-485 remote I/O with 12 digital inputs and 8 digital outputs

Highlights

  • 12-channel 24 VDC digital inputs with DI Event Counter mode, and
  • software selectable filtering time
  • 8-channel 24 VDC digital outputs with pulse output mode and
  • software selectable pulse width
  • LED indicators for all I/O channels
  • Over-temperature protection (up to 175°C)
  • Over-current protection (400-mA/channel)
  • Easy-to-use, quick programming library for VB, VC++, BCB, .NET
  • Firmware upgradable over RS-485
Categories: , ,

Description

Includes

  • 1 x ioLogik R2110 unit
  • 1 x support CD/DVD

Specs:

Channels

12, source type

Dry Contact
Logic 0: short to GND
Logic 1: open

Wet Contact
Logic 0: 0 to 3 VDC
Logic 1: 10 to 30 VDC
(DI COM to DI)

Channels

8, sink type, 36 VDC, 200 mA

I/O Mode

DO or Pulse Output (up to 50 Hz)

Overview:

Linking Input and Output Signals over RS-485

The ioLogik R2000 series was designed for system integrators to acquire and control remote digital and analog devices over RS-485. Types of digital on/off devices that can be controlled include proximity switches, mechanical switches, push buttons, optical sensors, LEDs, and light switches. Types of analog devices that can be controlled include pH, conductivity, temperature, humidity, pressure, flow, actuator, and valves. The ioLogik R2000 series can work with the standard Modbus protocol. SCADA software or the MXIO DLL library may be used to access the server.

Full Range of DI/DO and AI/AO Models

RS-485 is the most popular wiring standard for many industries. Now, Moxa offers a high quality line of remote I/O server with the RS-485 interface and upgraded functions.
Multi-functional digital I/O with DI/Event Counter and DO/Pulse Output modes
Multi-function analog I/O with mA/mV/Voltage modes
Over-current and over-voltage protection
High-reliability I/O design that ensures accuracy and reliability during field operation
Remote management of firmware upgrades over RS-485 network
Independent Configuration of Multi-Functional DI/DO and AI/AO Channels
Each input signal can be independently configured, with DI/Event Counter modes available for digital inputs and voltage/current modes available for analog inputs. Each digital output can be independently configured for DO or Pulse Output mode. The analog input channels support various signals ranging from +/-150 mV to +/-10V at 16-bit resolution. The analog output channels support 0 to 10V and 4 to 20 mA @ 12-bit resolution.

Reviews

There are no reviews yet.

Leave Comment
Be the first to review “ioLogik R2110 RS-485 remote I/O with 12 digital inputs and 8 dig”