ioLogik W5340-T Active GPRS I/O with 4 AIs, 8 DIOs, and 2 relay

ioLogik W5340 Active GPRS I/O with 4 AIs, 8 DIOs, and 2 relay outputs, -40 to 70°C operating temperature

Highlights

  • GPRS, Ethernet LAN, RS-232/422/485 supported
  • Smart Active GPRS connection
  • Low power consumption
  • Secure wake on call ID
  • Active messaging with real-time stamp
  • SNMP Trap with I/O status
  • Data logging with SD card
  • Unicode Active Messaging with real-time stamp, including
  • SMS, SNMP Trap with I/O status, TCP, email
  • ioAdmin and Active OPC Server supported
  • Windows/WinCE VB/VC.NET and Linux C APIs

Description

Includes

  • 1 x ioLogik W5300 Series unit
  • 1 x support CD/DVD
  • 1 x quad-band antenna (GSM/GPRS, omni-directional, 0 dBi, magnetic SMA, 3M)

Specs:

Interface
GPRS

Band Options
Quad-band 850/900/1800/1900 MHz

GPRS Multi-Slot Class
Class 10

GPRS Terminal Device Class
Class B

SMS
Point-to-Point Text/PDU

SIM Control Voltage
3 V

Ethernet
1 x 10/100 Mbps, RJ45

Protection
1.5 KV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, SNTP

Interface
1 x RS-232/422/485, software selectable (9-pin D-Sub, male or 5-contact terminal block)

Baudrate
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Channels
4 analog inputs with differential input

Resolution
16 bits

I/O Mode
Voltage / Current

Input Range
0 to 10 V, ±10 V, ±5 V, 0 to 20 mA, 4 to 20 mA

Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 55°C

Sampling Rate (all channels)
100 samples/sec

Input Impedance
200K ohms (min.)

Built-in Resistor for Current Input
102 ohms

Channels
8

I/O Mode
DI or Event Counter (up to 900 Hz)
DO or Pulse Output (up to 100 Hz)

Channels
Up to 8, source/sink selectable

Sensor Type
NPN/PNP type

Dry Contact
Logic 0 short to GND
Logic 1 open

Wet Contact
(For Source Type)Logic 0 0 to 3 VDC
Logic 1 10 to 30 VDC (DI COM to DI)

Channels
Up to 8, sink type, 36 VDC, 200 mA

I/O Mode
DO or Pulse Output (up to 100 Hz)

Isolation
3K VDC or 2K Vrms

Channels
2 Form A (N.O.) relay outputs, 5 A

Relay On/Off Time
10 ms, 5 ms (max.)

Initial Insulation Resistance
1G min. @ 500 VDC

Expected Life
100,000 times (Typical)

Initial Contact Resistance
30 milli-ohms (max.)

Pulse Output
20 operation times per minutes at rated load

Power Input
24 VDC nominal, 12 to 36 VDC

Overview:

The ioLogik W5340 is designed for cellular remote monitoring and alarm systems, such as automated river monitoring and pipeline monitoring. The ioLogik W5000 series uses GPRS technology to maximize the coverage of remote monitoring applications.

This kind of application needs cellular communications and I/O points connected to various sensors, including rainfall meters, flow meters, and water level detectors, since installing devices is usually difficult. They all enjoy the benefit of the GPRS communication feature of ioLogik W5340.

Reviews

There are no reviews yet.

Leave Comment
Be the first to review “ioLogik W5340-T Active GPRS I/O with 4 AIs, 8 DIOs, and 2 relay”